|
Fundamentals. How the Technology
Works.
Resonance
Inducers are a low power non-articulated signal generators.
There are
two important things to consider when we talk about this particular Resonance
Inducer:
1.The Power Source
The device is basically
a multilayer ¡°sandwich¡± of two different metallic materials. Because nature
differences of those materials, when layers are physically in contact, a
galvanic voltage is created. This voltage, originated by the potential
differential in between materials, as a battery, feeds the second effect.
2.
Signal Generator
Every single layer which is part of the
multilayer body is submitted to a secret and special surfaces treatment and
calibration. Once every layer is properly installed and assembled forming a
compact body, an internal electronic interlayer flow is created generating a
very low power multiphase and non-articulated signal. Similar to a multiplexed
signal, this signal will be passed to the fluid triggering and sustaining the
resonance effect.
Once is in
touch with the pipe, the signal is passed to the fluid triggering stochastic
resonance effect.
Trough the
bracket (two contact points bracket), the signal from the device will trigger a
natural physical effect in fluid and metallic parts of the circuit. We are
talking about ¡°stochastic resonance¡±. Stochastic resonance is observed when a noise
is added to a system changing the system's behavior. More technically, it occurs
if the signal-to-noise ratio of a nonlinear system or device increases for
moderate values of noise intensity.
Under
resonance some of the reactions on fluids physically change.
Stochastic
Resonance is unique in every system and depends directly of the kind of water,
magnitude of the piping involved, associated instrumentation, isolation levels,
etc. It¡¯s not possible calculate this level of resonance and measuring are not
possible neither.
What is
clearly verifiable is that under this resonant environment many well known
effects are altered, obtaining different results as usual.
Under the
effect, CaCO3 and MgCO3 salts nucleate and grows making smoother and non
scaling crystals.
Here is
the key of this antiscaling treatment. The inverse solubility of Calcium Salts
allows to this way of treatment very positive effect.
Directly,
calcium salts create solid compounds of crystals, high density calcium
built-up, difficult to remove and very undesirable in the most of the water
systems.
Under
resonance the density of calcium compounds is changed, larger crystals are
created and smooth shaped. Built-up is weak. Similar to a power is very easy to
remove from pipes. Most of the scaling is also remove by the water flow in
itself.
The effect
remains in fluid as long as Resonance Inducers are attached to the pipes.
Once the
system is tuned under every unique resonance frequency, the system will be
stable and remains in this condition as long as the resonance inducers are
installed. Once the device is removed, effect will slowly disappear.
The signal
meets the subsonic level intensity; it¡¯s out of the humans audition range.
Intensity of the signal and the
level of resonance is very low, imperceptible for humans and totally innocuous
for any applied instrumentation and control systems. This specific effect has
shown a clear effect on calcium based crystals formation without any
interference on electronics or sensors.
Tel 031) 8047-4910, CP 010-4015-6331
|
